Isz Single-Stage Centrifugal Pump--Sanlian/Kubota

Model NO.: ISZ Type


Working Pressure: Middle Pressure Pump


Position of Pump Shaft: Horizontal Pump


Mounting Height: Since Irrigation Centrifugal Pumps


Usage: Pump


Capacity: 6.3-720m3/H


Export Markets: Global


Specification: CE


HS Code: 8413709990




Impeller Number: Single-Stage Pump


Influent Type of Impeller: Single Suction Pump


Pump Casing Combined: Horizontal Split Pumps


Impeller: Closed


Color: as Required


Head: 5-125m


Trademark: Sanlian/Kubota


Origin: Anhui, China




Speed: 2900r/min 1450r/min

Inlet diameter: 50~300mm

Capacity: 6.3~720m3/h

Head: 5~125m

Ambient temperature: T≤ 40º C

Motor safety grade: IP54IP44

Motor insulation class: B class or F class

Y2 or Y series motor is matched, mechanical seal



Description

ISZ type pump is Single Stage single suction(axial suction)Centrifugal Pump. It can transport clear water or the liquids with physical or chemical properties similar to clear water, and the temperature can be no more than 80º C. This kind of pump is reliable, easy to install and maintain.





Application Area

ISZ type pump is single stage single suction(axial suction)centrifugal pump is applied in industry and urban Water Supply, high-rise water supply, water supply for high-rise buildings, pressurization for fire pipe, hot and cold water circulation for air-conditioning, long distance water convey, production technique pressurization transportation, drainage for various equipment&boiler, etc. It can also be used for agricultural irrigation and the transportation of clear water and some other liquids with physical and chemical properties similar to clear water.



ISZ Structural Characteristics

The pump volute(the pump casing and pump cover)makes up of the pump's working room. The impeller, the lengthened shaft etc are the rotational part of the pump. In order to balance the pump axial force, seal rings are set behind the back cover, and balance holes are also set on the impeller back cover. As the axial force is not powerful for some pump, there is no seal ring or balance hole set on the back of the impeller.

The pump sealing is made up of (10)mechanical seal, (8)shaft sleeve and so on to prevent air from entering and water from leaking.

In order to avoid shaft abrasion, the shaft sleeve protection is mounted where the shaft passes through the mechanical seal. O-ring is mounted between shaft sleeve and shaft to prevent air from entering and water from leaking along the fit surface.

The pump is driven through the direct connection of directly-connected pump cover and the motor. The pump rotates clockwise from the direction of drive end.

Contact us if you need more details on Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Pump、Centrifugal Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Single Suction Centrifugal Pump