YCB-G Heat Insulating Gear Pump (YCB1.6-0.6G)

Model NO.: YCB1.6-0.6G Tooth Flank: Straight Tooth Power: Electric Applications: Machinery Manufacturing Size: Ycb1.6-0.6g Speed: 910r/Min Trademark: HOFFWELL Origin: China Mesh Form: External Engaged Tooth Curve: Cycloid Type: Arc Gear Pump Certification: CE, ISO Different Pressure: 0.6MPa Colour: Blue and Green Specification: CE ISO HS Code: 8413602990 Brief Introduction:
   This series of heat insulating gear pump is used to transfer different medium,such as heavy oil,asphalt,resin,detergent and glue,which not includes solid particles and the temperature not higher than 300ºC,with solidifying character under the normal temperature.It also applies to the site with heat.Insulated requirement in the process technology and outdoors installation at very clod area.
   This series of heat insulating gear pump belongs to external gear pump.The tooth form is composite formed by arc and sine Curve.It could transfer many kinds of medium with steady output flow and pressure.There are heat insulating jacket and inlet and outlet joints,on the pump casing,so it could adpot the media,such as heat-conducting oil,steam,hot water and clod water to heat,keep warm and cooling the transferred medium and pump.When the viscosity of transferred medium is larger than 1500cst,speed should be reduced.
Structure Drawing Of Heat Insulating Pump:
   This series if heat insulating gear pump has simple and compact structure.It is convenient for use and maintenance.The main parts adopt high quality steel with precise processing,so it has good quality.It has good performance of self-priming.so it needs not to be file oil before operate the pump every time.Watch the pump from motor,the rotation direction is clockwise(Lift is suction,right is discharge)
1.Pump Casing
     Onr pair of gears and four bearing stands we reset in the hole of pump casing.The from cover and the back cover were set at ahead and behind.User could connect the pipe line by using fllanges at beth sides,and connect the heat insulated medium to preserve heat of chamber of pump by using of pump by using two screwed holes on the top of pump casing.
2.Gear and Shaft
    Spiral gear and shaft compose of shaft-gear.The helical shaft gear and herringbone shaft gear and herringbone shaft gear could be adopted according to different speciffications of capacity.
3.Bearing stand and bush(Sliding Bearing)
    After the bearing stand and bush are fitted together,put them into the pump casing and support the gear operate.
4.Gasket
   Gasket is put at compact plane between the pump body and front or back cover:it enhance the seal ability of joimting plane.
5.Shaft Seal
    Shaft seal has axial sealing function for the input shaft end of pump.There is shaft packing room on the front cover of pump.It could be equipped with mechanical seal or packing.
Performance Range:
Flow:1.6m³/h
Different Pressure:0.6Mpa
Rev:max.1152
Working Temperature:max.300ºC
Speed:910r/min
Viscosity:5-1500cst
Motor Power:0.75KW
Installation:Horizontal installation

Performance Data

Model	Port     (mm)	Capacity (m3/h)	Different Pressure (Mpa)	Speed   (r/min)	Motor Power (KW)
YCB0.6-0.6G	25	0.6	0.6	910	0.75
YCB1.6-0.6G	32	1.6		910	0.75
YCB3.3-0.6G	40	3.3		940	1.5
YCB4-0.6G	50	4		940	1.5
YCB8-0.6G	65	8		960	3
YCB10-0.6G	65	10		970	4
YCB20-0.6G	80	20		970	7.5
YCB25-0.6G	80	25		970	11
YCB30-0.6G	100	30		970	11
YCB40-0.6G	125	40		970	15
YCB50-0.6G	125	50		970	22

Contact us if you need more details on Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Heat Pump、Gear Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Gear Pump