Hw Series Volute Casing Mixed Flow Pump-Sanlian/Kubota
Basic Info
Model No.: HW series
Product Description
Model NO.: HW series Working Pressure: Middle Pressure Pump Position of Pump Shaft: Horizontal Pump Mounting Height: Since Irrigation Centrifugal Pumps Usage: Pumps Capacity: 70 ~ 8640 M3/H Export Markets: Global Specification: CE HS Code: 8413709990 Impeller Number: Single-Stage Pump Influent Type of Impeller: Single Suction Pump Pump Casing Combined: Horizontal Split Pumps Impeller: Closed Color: as Required Head: Head:3.5 ~ 20 M Trademark: Sanlian/Kubota Origin: Anhui, China
Product Description
Performance Range
Capacity: 70 ~ 8640 m3/h
Head: 3.5 ~ 20 m
Diameter: 100 ~ 800 mm
Description
HW series pump is horizontal, Single Stage, single suction, volute casing mixed flow pump. It is used to transport clean water, or other liquids with physical and chemical properties similar to clean water. It is used to transport liquids with its temperature less than 50º C.
Application Area
It is widely applied in agricultural irrigation, Water Supply and drainage for city and industry, Water Treatment etc.
Structural Characteristics
HW type pump is mainly made up of pump cover, impeller, pump casing, pump shaft, shaft sleeve and bearing housing etc.
Pump cover is connected to pump casing and inlet pipe separately. There shall be proper clearance between the surface of pump cover and impeller. If the clearance is too small, it is easy to cause friction; While the clearance is too large, it will cause the backflow of pressure water in the pump, which reduces the efficiency of pump. Flat surface seal can be adjusted by paper washer.
Shaft seal is made up of packing stuff, packing ring, packing gland and oil immersed asbestos packing. It shall prevent air from getting into the pump and avoid the water in the pump flowing out along the shaft.
Shaft sleeve is used to protect main shaft. It shall be replaced after abrasion.
Pump shaft is supported by single-row radial roller bearing. The bearing can be lubricated by lubricating oil, and oil mass shall be controlled within the marked line of oil level rod; And the lubricating grease can also be used when assembling the pump. Refill the lubricating oil or grease by disassembling front cover and back cover.
There are screw holes on the pump casing, which is used to lead water or connected to vacuum pump to extract air and lead water.
100HW~300HW pump is vertical water-out type, see picture 1; 400HW~500HW pump is horizontal water-out type, see picture 2; 350HW pump has vertical water-out type and horizontal water-out type. Contact us if you need more details on Mixed Flow Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pump、Water Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Description
Performance Range
Capacity: 70 ~ 8640 m3/h
Head: 3.5 ~ 20 m
Diameter: 100 ~ 800 mm
Description
HW series pump is horizontal, Single Stage, single suction, volute casing mixed flow pump. It is used to transport clean water, or other liquids with physical and chemical properties similar to clean water. It is used to transport liquids with its temperature less than 50º C.
Application Area
It is widely applied in agricultural irrigation, Water Supply and drainage for city and industry, Water Treatment etc.
Structural Characteristics
HW type pump is mainly made up of pump cover, impeller, pump casing, pump shaft, shaft sleeve and bearing housing etc.
Pump cover is connected to pump casing and inlet pipe separately. There shall be proper clearance between the surface of pump cover and impeller. If the clearance is too small, it is easy to cause friction; While the clearance is too large, it will cause the backflow of pressure water in the pump, which reduces the efficiency of pump. Flat surface seal can be adjusted by paper washer.
Shaft seal is made up of packing stuff, packing ring, packing gland and oil immersed asbestos packing. It shall prevent air from getting into the pump and avoid the water in the pump flowing out along the shaft.
Shaft sleeve is used to protect main shaft. It shall be replaced after abrasion.
Pump shaft is supported by single-row radial roller bearing. The bearing can be lubricated by lubricating oil, and oil mass shall be controlled within the marked line of oil level rod; And the lubricating grease can also be used when assembling the pump. Refill the lubricating oil or grease by disassembling front cover and back cover.
There are screw holes on the pump casing, which is used to lead water or connected to vacuum pump to extract air and lead water.
100HW~300HW pump is vertical water-out type, see picture 1; 400HW~500HW pump is horizontal water-out type, see picture 2; 350HW pump has vertical water-out type and horizontal water-out type. Contact us if you need more details on Mixed Flow Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pump、Water Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Chemical Pump
Premium Related Products
Other Products
Hot Products
Best Quality with Low Price Centrifugal Oil PumpAutomatic Hydraulic Control ValveLec Series Pump Electric Control PanelSJB Diesel Driver Deep Well PumpZs Type High Quality Heavy Duty Minerals Processing Slurry PumpUL List Centrifugal Fire Fighting Water PumpVertical Axial Flow Pump (900HLB16)Emergency Movable Water Pumps with Trolley or TrailerZWL Micro-Computerized Non-Suction Pressure Constant-Flow Water Supply EquipmentMulti-Stage Sectional Type Centrifugal Water PumpMulti-Stage Fire Fighting Pump with Chinese First UL List PumpSLW Series Horizontal Centrifugal PumpHigh Quality Wq Submersible Sewage PumpsSlow Split Casing Centrifugal Pump (SLOW800-980)Double Suction Split Casing Pumps (SLOW)China First Fire-Fighting Centrifugal Pumps with UL Certificate