Mixed Flow Chemical Pump by Anhui Sanlian

Model NO.: ASP5620 Working Pressure: Low Pressure Pump Position of Pump Shaft: Horizontal Pump Mounting Height: Since Irrigation Centrifugal Pumps Usage: Pump Head: Not More Than 25m Specification: CE; ISO9001 HS Code: 8413709990 Impeller Number: Single-Stage Pump Influent Type of Impeller: Single Suction Pump Pump Casing Combined: Horizontal Split Pumps Impeller: Closed Capacity: Not More Than 7000m3/H Trademark: Sanlian/OEM Origin: Anhui, Ma′anshan ASP5620 series Single Stage,centrifugal chemicl mixed flow pump includes horizontal radial section,cantilever type.
The pump is safe,steady operation and easy to maintenance.
The pump is steady in hydraulic performance,high efficiency.
The pump can transmit liquid that is neutral or corrosive with large flow rate,low head,even or has some particles.
Sealing can be packing seal,single,double mechanical seal according to different condition.
Rotation direction:The pump rotates clockwise from the drive end.

Application Area
The pump can transmit liquid that is neutral or corrosive with large flow rate,low head,even or has some particles.
Irrigation and drainage equipment
Cooling water circulation system
City coal gas project
Forced circulation in chemical processing
Salt making and alkali making industry

Performance Range
Capacity : 0 ~7000m³/h
Head: 0~25m
Work pressure: 0~1.0Mpa
Work temperature:  -20~140ºC


Structural Characteristics
ASP series mixed flow pump is a "Pull-out"type pump.When examining and dismantling impeller and shaft seal,there is no need to disconnect the pipeline that is connected with the pump casing.Pump shaft is precision machined,and the bearing is thin oil lubrication.There is protective shaft sleeve in the stuffing box cover.The oil in the bearing box can be controlled by a constant oil cup.
Supporting foot of pump can bear any load coming from pipeline,and pass it to the foundation.Then the rotor can not bend because of the load of bearing to make sure the max. service life of bearing.
Passing area is so large that it can reduce the blocking.
Pump with specification 35-40,its outlet&inlet flange dimension complies with HG20592 Standard,pressure rating is 1.0Mpa;for the pump with much larger specification,its pressure rating is 0.6MPa.
Electric motor or internal combustion engine shall be used as the power drive.
A whole air bleeder shall be installed on the pump,which shall be good for the exhaust of suction pipe.
Sealing can be packing seal and double mechanical seal.

Contact us if you need more details on Mixed Flow Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Chemical Pump、Sewage Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Chemical Pump