Find Split Casing Pump, Split Case Pump, Single Stage Double on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Centrifugal Pump > Centrifugal Pump 250s65

Centrifugal Pump 250s65

Basic Info

Model No.:  MW 250S65

Product Description

Model NO.: MW 250S65 Working Pressure: Low Pressure Pump Position of Pump Shaft: Horizontal Pump Impeller: Closed Specification: SGS HS Code: 8413709990 Impeller Number: Single-Stage Pump Influent Type of Impeller: Double-Suction Pump Pump Casing Combined: Horizontal Split Pumps Trademark: M&W pump Origin: Changsha, Hunan, China Centrifugal Pump 250S65

S (SM, SF, SL) pump is a new generation product with advanced performance, stable operation, safety and reliability.
This pump is designed according to National standard with high serialization, standardization and universalization. It adopts new materials and structure in the design, so it can transfer many kinds of mediums.
S type pump is for the transfer of clear water or other liquids with physical and chemical property similar to water. SM type pump is for the transfer of medium with much sediment. SF type pump is for the transfer of corrosive medium. SY type pump is for the transfer of oil. S (SM, SF, SL, SY) series of pumps can be applied to Water Supply and drainage for factories, mines, cities and power stations, farmland irrigation and drainage as well as water conservancy projects. The transfer medium temperature is between -20 degree to 80 degree.
Performance Range: Capacity Q: 50~15000m3/h
Head H: 8.6~140m
All pumps of this series can run with speed decrease and different parameters and structure can be designed according to customers' requirements.
Structure: S (SM, SF, SY) type pump is installed horizontally with inlet and outlet line under the pump axial centerline. It is perpendicular to pump axial line. It only needs to remove the pump cover and take out rotor part without dismantling the inlet and outlet pipelines during the overhaul. The pump mainly consists of pump body, pump cover, impeller, sealing ring, shaft sleeve and bearing. The pump body and pump cover constitute impeller working chamber. The impeller axial force is balanced by impeller symmetrical layout.
Bearing: Rolling bearings with grease lubrication at both ends of the pump support the rotor part. Lubrication oil will be adopted if the inlet diameter is more than 700mm.
Shaft seal: 1. Soft packing seal; 2. Mechanical seal (diameter below 800mm).
SL means vertical installation. The suction inlet and discharge outlet are both horizontal. The split surface of pump body and pump cover is perpendicularly separated from axial centerline.
The rotation direction is clockwise viewed from the end of motor (The rotation direction can be designed to be anti clockwise as per customers' requirements).
Materials of flow passage components: Cast iron for S type pump; Anti friction cast iron, cast steel and stainless steel for SM and SY type pump; NiCr cast iron and stainless steel for SF type pump. Different materials can be applied as per customers' requirements.
Model instruction: Eg. 500S (SM, SF, SL, SY) 35A
500-Pump inlet diameter (mm)
S-single stage double suction centrifugal clear Water Pump
SM-Anti friction Single Stage Double Suction centrifugal pump
SF-Anti corrosion single stage double suction centrifugal pump
SY-Oil type single stage double suction centrifugal pump
SL-Vertical single stage double suction centrifugal
35-Head at the design point (m)
A-The first cut of impeller

Parameters

Model
Capacity
Q
Head
H
Speed
n
Motor Eff.
η
NPSH Impeller Diameter Diameter WT.
kg

 

 

 

 
Power Model
 

 

 
Inlet Outlet
 

 
m3/h m r/min kw
 
% m
 
mm
 
250S95A 432.0
540.0
720.0
86.0
85.0
76.0
1480 200.0 Y315L2—4 78
81
82
6.3 505 250 200 900
250S95B 432.0
540.0
720.0
77.0
74.0
67.0
1480 160.0 Y315L1—4 75
80
81
6.3 480 250 200 900
250S65 360.0
485.0
612.0
70.0
65.0
56.0
1480 132.0 Y315M—4 75
79
72
3.8 450 250 200 710
250S65A 338.0
462.0
535.0
60.0
53.0
49.0
1480 110.0 Y315S—4 74
77
75
3.8 410 250 200 710
 

Contact us if you need more details on Centrifugal Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Split Case Pump、Double Suction Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Centrifugal Pump